Nortel Networks NN43001-106 - Manual (Page 407)

Feature implementation 407
Group Call
This feature is not selected for automatic Outgoing Line Selection or
Non-Ringing Line Selection. It is selected for Incoming Ringing Line
Selection.
Hot Line
Since the Hot Line key acts as a Single Call Ring (SCR) key, incoming
ringing line preference can be applied. Outgoing line preference
automatically selects a line other than the current Hot Line, so that a Hot
Line call is not accidentally activated
Private Line Service
A Private line DN is selected by Incoming Ringing/Non-Ringing Line
Selection and Outgoing Line Selection.
Voice Call
This feature is not selected by automatic Outgoing Line Selection. It is
selected for Incoming Ringing and Non-Ringing Line Selection.
Feature packaging
Automatic Line Selection (LSEL) package 72 has no feature package
dependencies.
Feature implementation
LD 11 - Assign Automatic Line Selection for each Meridian 1 proprietary telephone.
Prompt Response Description
REQ: CHG Change existing data.
TYPE: a...a Telephone type. Type ? for a list of possible responses.
TN
l s c u
Terminal Number
Format for Large System and CS 1000E system, where
l = loop, s = shelf, c = card, u = unit.
c u Format for Small System and Media Gateway 1000B
where c = card and u = unit.
CLS (IRD) IRA
(NID) NIA
(OLD) OLA (Deny) allow incoming ringing line preference.
(Deny) allow incoming non-ringing line preference.
(Deny) allow outgoing line preference.
LPK xx Specify the last key to be scanned for line preference
(such as 0-7, 10-17, 20-27).
Prompted only if CLS = IRA, NIA, or OLA.
Note: A value of 0 (zero) for LPK disables this feature.
Nortel Communication Server 1000
Features and Services - Book 1 of 6 (A to B)
NN43001-106 01.04 Standard
Release 5.0 27 July 2007
Copyright © 2007, Nortel Networks
.