Nortel Networks NN43001-106 - Manual (Page 106)

106 2500 Telephone Features
Feature interactions
500 Telephone Features
When 500 Set Dial Access to Features (SS5) package 73 is equipped,
2500-type telephones also access features by dialing SPRE and a two-digit
access code as follows:
• System Speed Call User SPRE + 73
• Call Forward All Calls SPRE + 74
• Speed Call Controller SPRE + 75
• Speed Call User SPRE + 76
• Permanent Hold SPRE + 77
Remote Call Forward
When Flexible Feature Codes (FFC) package 139 is defined and active on
your system, a telephone provisioned for Call Forward in LD 10 can also
Call Forward All Calls from a remote internal DN.
Feature packaging
There are no specific packaging requirements associated with this feature.
Feature implementation
LD 10 - Enable 2500 Telephone Features.
Prompt Response Description
REQ: CHG Change.
TYPE: 500 Telephone type.
TN Terminal Number
l s c u Format for Large System and CS 1000E system,
where l = loop, s = shelf, c = card, u = unit.
c u Format for Small System, Media Gateway 1000B, and Media
Gateway 1000T, where c = card and u = unit.
CLS (XFD) XFA (Deny) allow transfer.
FTR CFW xx Call Forward All Calls and DN length (4-23).
Enter X CFW to remove.
SCC xxxx Speed Call Controller and list number.
Enter X SCC to remove.
SCU xxxx Speed Call User and list number.
Enter X SCU to remove.
Nortel Communication Server 1000
Features and Services - Book 1 of 6 (A to B)
NN43001-106 01.04 Standard
Release 5.0 27 July 2007
Copyright © 2007, Nortel Networks
.