Westermo MR Series - Manual (Page 94)

94 6622-3201
Web Interface and Command Line Reference Guide www.westermo.com
Using Text Commands
From the command line, use the qos command to assign profiles and priorities to each of the
queues relating to a PPP instance.
To display a list of the profiles assigned to the queues belonging to a QOS instance, enter the fol-
lowing command:
qos ?
where is the QOS instance number.
To assign a profile to a queue for a QOS instance, use the command in the format:
qos parameter
The parameters and values are:
Parameter Values Equivalent Web Parameter
linkkbps number Link speed (Kbps)
q0prof 0-11 Queue 0 Profile
q0prio 0-4 Queue 0 Priority
q1prof 0-11 Queue 1 Profile
q1prio 0-4 Queue 1 Priority
q2prof 0-11 Queue 2 Profile
q2prio 0-4 Queue 2 Priority
q3prof 0-11 Queue 3 Profile
q3prio 0-4 Queue 3 Priority
q4prof 0-11 Queue 4 Profile
q4prio 0-4 Queue 4 Priority
q5prof 0-11 Queue 5 Profile
q5prio 0-4 Queue 5 Priority
q6prof 0-11 Queue 6 Profile
q6prio 0-4 Queue 6 Priority
q7prof 0-11 Queue 7 Profile
q7prio 0-4 Queue 7 Priority
q8prof 0-11 Queue 8 Profile
q8prio 0-4 Queue 8 Priority
q9prof 0-11 Queue 9 Profile
q9prio 0-4 Queue 9 Priority
The queue priority values are mapped as follows:
Value Priority
0 Very High
1 High
2 Medium
3 Low
4 Very low