Westermo MR Series - Manual (Page 77)

77 6622-3201
Web Interface and Command Line Reference Guide www.westermo.com
Using Text Commands
From the command line, use the dnsupd command to configure or display DNS Update settings. To
display current settings enter the command:
dnsupd ?
where is 0.
To change the value of a parameter use the command in the format:
dnsupd
The parameters and values are:
Parameter Values Equivalent Web Parameter
autotzone off, on Auto-detect time offset
b64pw off, on Password is Base64 encoded
delprevrr off, on Always delete previous records
epassword text None - this is the password in
encrypted format. This parameter is
not configurable.
fudge number Required time accuracy (s)
ifadd 0,1,2 Interface #
ifent none ppp, eth, default Interface
name text Name to update
password text Password
server IP address DNS server IP address
ttl number Time to live (s)
tzone 0-24 Local time offset from GMT (hrs)
upd_int number Update interval (s)
username text Username
zone text Zone to update
For example, to set the username to “david24” you would enter the command:
dnsupd 0 username david24