Westermo MR Series - Manual (Page 191)

191 6622-3201
Web Interface and Command Line Reference Guide www.westermo.com
nocfg 0,1,2,3 Remote access options:
0=No restrictions
1=Disable management
2=Disable return RST 3=Disable management and
return RST
password blank Password
phonenum phone number Dial-out number
pppanon off, on PPP analysis
prefix number Dial-out prefix
pwr_dly number Power up AODI delay (s)
qos off, on QOS
rip 0,1,2,3 RIP version: 0=Off 1=V1 2=V2 3=V1 Compat
ripauth 0,1,2,3 RIP authentication method: 0=Off 1=Access list
2=Plain password 3=MD5
ripip IP address RIP destination IP
ripis off, on Only send RIP when interface is in service
rxtimeout number Rx packet Inactivity timeout (s)
tband number Time band
timeout number Inactivity timeout (s)
timeout2 number Inactivity timeout 2 (s)
uplogmins number Log event up-time (mins)
use_modem 0,1,2,3,4,5,6,7 Use GPRS/PSTN/external modem:
0=No
1=Any GPRS Channel
2=External modem
3=PSTN
4=GPRS Channel 1
5=GPRS Channel 2
6=External modem #1
7=External modem #2
username text Username
For example, to enable answering on PPP 1 you would enter:
ppp 0 ans 1