Westermo MR Series - Manual (Page 360)

360 6622-3201
Web Interface and Command Line Reference Guide www.westermo.com
Using Text Commands
From the command line the sastat command can be used to display IPSec SA information. The for-
mat of the command is:
sastat
where and are optional.
sastat peer
sastat peer allows you to view a selection of sites, eg:
sastat peer uk-north-* allows you to view a specific peer IP address. For example, to
display SA information for all eroutes, you would enter:
sastat
Something similar to that shown below will be displayed:
IPsec SAs. Eroute 0 -> 19
Outbound V1 SAs
SPI Eroute Peer IP Rem.IP Rem.Mask Loc. IP Loc. Mask TTL KBytes Left
7297fce8 0 217.34.133.29 10.1.0.0 255.255.0.0 172.16.1.0 255.255.255.0 958 32664
7297fcea 1 217.34.133.29 192.168.50.0 255.255.255.0 172.16.1.0 255.255.255.0 1401 32767
7297fce2 1 217.34.133.29 192.168.50.0 255.255.255.0 172.16.1.0 255.255.255.0 49 32767
7297fceb 2 217.34.133.29 10.1.0.0 255.255.0.0 192.168.200.0 255.255.255.0 1121 32767
7297fce7 2 217.34.133.29 10.1.0.0 255.255.0.0 192.168.200.0 255.255.255.0 220 32767
Inbound V1 SAs
SPI Eroute Peer IP Rem. IP Rem. Mask Loc. IP Loc. Mask TTL KBytes Left
ae4197d0 0 217.34.133.29 10.1.0.0 255.255.0.0 172.16.1.0 255.255.255.0 958 32664
ae4197d1 1 217.34.133.29 192.168.50.0 255.255.255.0 172.16.1.0 255.255.255.0 1401 32767
ae4197ce 1 217.34.133.29 192.168.50.0 255.255.255.0 172.16.1.0 255.255.255.0 49 32767
ae4197d2 2 217.34.133.29 10.1.0.0 255.255.0.0 192.168.200.0 255.255.255.0 1121 32767
ae4197cf 2 217.34.133.29 10.1.0.0 255.255.0.0 192.168.200.0 255.255.255.0 220 32767
Inbound V2 SAs
List Empty
OK
Status > ISDN BRI 6.18
The Status > ISDN BRI page shown below lists the status of the ISDN B and D-channels. If no
ISDN connection is present, all three entries will be listed as Off. If the unit is connected to an
ISDN line and the D-channel is functioning correctly, the D-channel entry will be shown as On. If
one or two B channels are in use, the appropriate B-channel entries will be shown as On.
Status > Web Directory 6.19
The Status > Web Directory page displays a list of all the files that are currently stored in the
.WEB file. The listing shows the filenames and their sizes in bytes and at the bottom of the page
gives totals for the number of files and space used.
Status > Web Server 6.20
The Status > Web Server page displays memory usage information for the built-in Web server.