Westermo MR Series - Manual (Page 123)

123 6622-3201
Web Interface and Command Line Reference Guide www.westermo.com
gpson 0,1 None - Defines ASY as GPS
port. The command inter preter
will ignore everything on that
port: 0=Not defined as GPS port
1=Defined as GPS port
grecs off, on GRE checksums
hostname text System hostname
inc_cli off, on Include CLI when dialling
ipadd 0,1,2 GP Sockets use IP from interface #
ipent “”, ETH, PPP GP Sockets use IP from interface
noreboot_zero number None
noremecho off, on remote command echo
oosretrig off, on None - enables layer 2 and layer
3 re-triggering when all routes are
out of service and a packet comes
in.
postbanner filename Post login banner
ppp_detect off, on PPP detect
prebanner filename Pre login banner
rip number RIP interval (s)
route_dbcast off, on Route directed broadcasts
route_dly number Alternative route delay (s)
route_dwn number IP Route out of service time (s)
routeup_dly number ’Always-on’ route return-to-service
delay (s)
sec_hostname text Secondary hostname
sec_ip text Secondary IP address
sock_connto number TCP socket connect timeout (s)
sock_inact number TCP socket inactivity timer (s)
sock_keepact number TCP socket keep-alive interval (s)
sreglok 0,2 None - Locks changes to the ASY
: 0=Port unlocked 2=Port
locked
subject text Auto configure Email: Subject
telnet_mode number ASY Telnet mode
to text Auto configure Email: To
trap_ip text SNMP trap destination address
tremto number Remote command timeout (s)
unitid text Unit identity
usertask filename User task filename
x25_callto number X25 call timeout (s)
x25sw_callto number X25 switch call timeout (s)