Westermo MR Series - Manual (Page 238)

238 6622-3201
Web Interface and Command Line Reference Guide www.westermo.com
Confi gure >SNMP > Trap Servers > Trap Server n 4.79
The Westermo router can send traps to servers running SNMP software on certain events. 2 trap
servers can be configured.
Using the Web Page(s)
The Configure > SNMP > Trap Servers > Trap Server n page, is to configure the details of the
trap servers that the unit will send traps to..
Trap Server IP Address:
The IP address of the server running the SNMP software.
Trap Server Port:
The UDP port number that the SNMP server is listening on. Default is 162.
SNMP Version:
This needs to be set to the same version that the servers SNMP software is running.
SNMP v1/v2c Trap Confi guration
Community:
The name of the SNMP community.
SNMP v3 Trap Confi guration
Trap Server Engine ID:
The SNMP server software Engine ID. This will be configured within the application.
Trap Server Security Name:
This needs to match a user from within Configure > SNMP > Users. This will be used to
authenti cate the traps to the server.
Trap Server Security Level:
This security level is for the traps only and will over-ride the security level of the user config-
ured above.