Westermo MR Series - Manual (Page 346)

346 6622-3201
Web Interface and Command Line Reference Guide www.westermo.com
Status > Ethernet > ETH n 6.4
The Status > Ethernet > ETH n pages show the settings of the various ethernet interfaces.
Activation Status:
The interface is active if it has an assigned IP address and has not been deactivated by a higher
level tasks.
Connection Status:
The connection status of the interface.
Link:
The negotiated link settings.
MAC:
The MAC address of the interface.
IP Address:
The IP address of the interface.
Mask:
The mask of the interface.
DNS Server:
The IP address of the DNS server.
Gateway:
The IP address of the gateway.
DHCP Server:
The IP address of the DHCP server if DHCP client is enabled.
Lease Remaining (mins):
DHCP lease time remaining if using the DHCP client.
Using Text Commands
From the command line you may view the status of the Ethernet port by using the eth command
with the status parameter:
eth status
where is the ethernet instance. For example:
eth 0 status
Activation Status: Active
Connection Status: Connected
Link: 100Base-T Full-Duplex
MAC: 00 04 2D 00 97 26
IP Address: 10.1.39.28
Mask: 255.255.0.0
DNS Server: 0.0.0.0
Gateway: 0.0.0.0
OK