Westermo MR Series - Manual (Page 69)

69 6622-3201
Web Interface and Command Line Reference Guide www.westermo.com
44 - NetBIOS name server address:
This is used to specify the primary WINS server.
44 - Secondary NetBIOS name server address:
This is used to specify the secondary WINS server.
51 - Lease time (mins):
This parameter specifies how long (in minutes), a DHCP client can use an assigned IP address
before it must renew its configuration with the DHCP server.
150 - TFTP server address:
This parameter specifies the IP address of a TFTP server. Mainly used for boot images.
161 - FTP server address (for Wyse Terminals)
Custom optionfor use with Wyse Terminals
162 - FTP Root Dir (for Wyse Terminals)
Custom optionfor use with Wyse Terminals
Next server address:
This parameter specifies the IP address of a secondary configuration server. This server does
not have to be on the same logical subnet as the client.
Server hostname:
This parameter specifies a host that the DHCP client can make contact with, in order to down-
load a boot file.
Boot filename:
This parameter specifies the name of the boot file the client can download from the host speci-
fied in the Server hostname parameter.
Response backoff delay(ms):
Configuring a backoff time will delay the DHCP_OFFER messages sent by this DHCP server.
This will allow other DHCP servers on the network to respond first.