Westermo MR Series - Manual (Page 61)

61 6622-3201
Web Interface and Command Line Reference Guide www.westermo.com
Confi gure > Certifi cates > SCEP 4.12
This page contains information needed to both request CA certificates from the CA server, and to
enrol the certificate requests using Simple Certificate Enrolment Protocol (SCEP).
Using the Web Page(s)
Host:
The IP address of the CA server.
Remote port:
The destination port. If this parameter is non-zero, the unit will use this value as the destination
port rather than the default of 80 (HTTP).
Path:
The path on the server to the SCEP application. The path will be entered automatically if you
choose either cgi-bin or Microsoft SCEP from the drop-down list.
Application:
This represents the SCEP application on the server.
CA Identifier:
CA identifier.
Private key filename:
The filename of the private key.
Certificate request filename:
The filename of the certificate request.
Certificate filename:
The filename for the public key certificate (must be prefixed with “cert”)
CA certificate filename:
The filename of the CA certificate.
CA encryption certificate filename:
The filename of the CA encryption certificate.
CA signature certificate filename:
The filename of the CA signature certificate.
CA certificate filename prefix:
Prefix used for all CA certificates.
There are also two buttons at the bottom of the page:
Enrol Certificate Request
Clicking this button will send the certificate request to the CA for signing.
Get CA certificate/s
Clicking this button will retrieve the CA certificates from the CA server.