Westermo MR Series - Manual (Page 383)

383 6622-3201
Web Interface and Command Line Reference Guide www.westermo.com
RESET Send Reset Packet 11.4.9
RESET is used to issue a reset for the current call to the network. It does NOT clear the call but it
does return the network level interface to a known state by re-initialising all Level 3 network con-
trol varia bles. All data in transit will be lost.
RPAR? Read Remote X.3 Parameters 11.4.10
RPAR? lists the current X.3 parameter settings for the remote system.
RSET Set Remote X.3 Parameters 11.4.11
RSET is used to set one or more X.3 parameters for the remote system. It is entered in the format:
RSET par #:value[,par #:value[,par #:value ...]]
SET Set Local X.3 Parameters 11.4.12
SET is used to set one or more of the local X.3 parameters for the duration of the current session.
The format of the command is:
SET par #:value[,par #:value[,par #:value ...]]
11.4.13 STAT Display Channel Status
STAT displays the current status for each logical channel indicating whether it is free or engaged.
For example:
stat
PAD STATE
1 ENGAGED
2 FREE
3 FREE
4 FREE