Confi gure > w-wan module > cell monitor 4.103 – Westermo MR Series User Manual
Page 297
297
6622-3201
Web Interface and Command Line Reference Guide
www.westermo.com
Confi gure > W-WAN module > Cell Monitor
4.103
The Cell Monitor retrieves information about the GSM network and displays the following:
The parameters of the GSM cell currently being used to provide the communications link (typ ically
GPRS), known as the serving cell
The parameters of neighbouring GSM cells
GPRS specific parameters
Using the Web Page(s)
Monitor settings
This section contains parameters that determine what information is collected by the Cell
Monitor, and how often.
Neighbour cells
If this parameter is selected, the Cell Monitor will retrieve information about the neighbouring
cells.
Serving cell
If this parameter is selected, the Cell Monitor will retrieve information about the GSM cell cur-
rently being used to provide the communications link.
GPRS information
If this parameter is selected, the Cell Monitor will retrieve GPRS specific cell information.
Monitoring interval (s):
When this parameter is set to a non zero value, this specifies the interval (in seconds) between
information retrieval. A value of zero disables monitoring.
Email settings
The Cell Monitor may be configured to send an email at specified intervals. The parameters are as
follows:
Email interval (mins):
This parameter specifies the interval (in minutes) between email transmissions.
Attach Event Log
If this parameter is selected, the unit’s event log will be sent with the email as an attachment.
Email To:
This parameter specifies a destination email address. Multiple email addresses may be specified
by separating each address with a comma.
Email From:
This parameter specifies the identify of the sender of the email.
Email Subject:
This parameter specifies a subject to describe the contents of the email.
Email Template:
This parameter specifies the name of a file on the unit to be used as a template for the email.