Westermo MR Series - Manual (Page 217)

217 6622-3201
Web Interface and Command Line Reference Guide www.westermo.com
Confi gure > PSTN Modem 4.69
This page only appears on models which are fitted with an internal PSTN modem, e.g. MW3520
fitted with PSTN option. The Configure > PSTN Modem page provides access to the parameters
that are used to configure internal PSTN modems. The parameters are identical to those for the
Configure > PPP > External Modems > External Modemn pages except that there is no ASY
port parameter. (The ASY port used by internal PSTN modems is predetermined).
Using the Web Page(s)
Refer to the Configure > PPP > External Modems > External Modemn section for a descrip-
tion of the parameters used to set up an internal PSTN modem where this feature is available.
Using Text Commands
From the command line, use the modemcc command to configure or display the internal PSTN
modem settings.
To display current settings for the internal modem enter the following command:
modemcc ?
where is 0 if your unit does NOT include a GPRS module, or 1 if it DOES include a
W-WAN module.
To change the value of a parameter use the following command:
modemcc