Westermo MR Series - Manual (Page 316)

316 6622-3201
Web Interface and Command Line Reference Guide www.westermo.com
LF Insertion (after CR) 4.110.13
Controls the automatic generation of a Line Feed by the PAD.
Option Description
0 No line feed insertion
1 Line Feeds inserted in data passed TO the DTE
2 Line Feeds inserted in data received FROM the DTE
4 Line Feeds inserted after CRs echoed to DTE
The line feed values can be added together to select Line Feed insertion to any desired combina-
tion.
LF Padding 4.110.14
Some terminal devices such as printers require a delay after each Line Feed before they can con-
tinue to process data. This parameter controls the number of padding characters (NUL - ASCII 0)
that are sent after each [LF] to create such a delay.
Option Description
0 No line feed padding.
1-255 Number of NUL characters inserted after LF
Editing 4.110.15
Enables (1) or disables (0) local editing of data input fields by the PAD before data is sent. The three
basic editing functions provided are character delete, line delete and line re-display.
The editing characters are defined by parameters 16, 17 and 18. In addition, parameter 19 deter-
mines which messages are issued to the DTE during editing.
When editing is enabled, the idle timer delay (parameter 4) is disabled and parameter 3 must be
used to select the desired data forwarding condition.
Character Delete Character 4.110.16
This parameter defines the edit mode delete character (ASCII 0-127). The default is backspace
(ASCII 08).
Line Delete Character 4.110.17
This parameter defines the edit mode line buffer delete character (ASCII 0-127). The default is
CTRL-X (ASCII 24).
Line Redisplay Character 4.110.18
Specifies the character that re-displays the current input field when in editing mode (ASCII 0-127).
The default is CTRL-R (ASCII 18).