Westermo MR Series - Manual (Page 343)

343 6622-3201
Web Interface and Command Line Reference Guide www.westermo.com
Using Text Commands
To display the current statistics for Layer 2 LAPD enter the command:
at\mibs=lapd..stats
where is 0 - 2.
To clear the current statistics for Layer 2 LAPD enter the command:
at\mibclr=lapd..stats
D Channel Stats 5.15.3
Statistic Description
Frame Loss Framing loss events
Sync Loss INFO-2 events
Collisions D-channel collisions
Ph Acts Physical layer activations
Layer 1 D Sync Stats 5.15.4
Statistic Description
Rx Giants Received frames exceeding maximum frame length
Rx Runts Received frames shorter than minimum frame length
Rx Frames Received High-Level Data Link Control frames
Rx Bytes Successfully received data bytes
Rx Crcerr Received Cyclic Redundancy Check errors
Rx Overrun Receive First In First Out overflows
Rx Abort Received abort sequences detected
Rx NonOct Received framing errors
Msg Short Frames discarded due to lack of system message buffers
Buf Short Frames discarded due to lack of system buffer space
Tx Frames Transmitted High-Level Data Link Control frames
Tx Bytes Successfully transmitted data bytes
Tx Und Transmit First In First Out underruns
Using Text Commands
To display the current statistics for Layer 1 D Sync enter the command:
at\mibs=syn.d
To clear the current statistics for Layer 1 D Sync enter the command:
at\mibclr=syn.d