Westermo MR Series - Manual (Page 342)

342 6622-3201
Web Interface and Command Line Reference Guide www.westermo.com
Statistics > X25 PADs > PAD n 5.15
Note:
Which sets of statistics are displayed for each X.25 PAD instance is dependant upon the Layer
2 inter face parameter defined on the Configure > X25 > PAD > PAD n pages.
Layer 3 X25 Stats 5.15.1
Statistic Description
Tx Calls X.25 call attempts
Rx Calls Received X.25 calls
Rx Paks Received X.25 packets
Rx Bytes Received X.25 data bytes
Tx Restarts Transmitted X.25 Restart Request packets
Rx Restarts Received X.25 Restart Indication packets
Tx Paks Transmitted X.25 packets
Tx Bytes Transmitted X.25 data bytes
Using Text Commands
To display the current statistics for Layer 3 X25 enter the command:
at\mibs=x25..stats
where is 0 - 7.
To clear the current statistics for Layer 3 X25 enter the command:
at\mibclr=x25..stats
Layer 2 LAPD Stats 5.15.2
Statistic Description
TEI Current Terminal Endpoint Identifier of the LAPD instance set in the
Layer 2 interface # parameter on the configuration page for the X.25 PAD
instance. The TEI is set on the configuration page for the LAPD instance
Rx Frames Received I-frames
Rx Bytes Received I-frame data bytes
Rx Rejs Received reject frames
Tx Rejs Transmitted reject frames
Tx Frames Transmitted I-frames
Tx Bytes Transmitted I-frames data bytes
Rx Sabmes Received Set Asynchronous Balanced Mode Extended frames
Tx Sabmes Transmitted Set Asynchronous Balanced Mode Extended frames
Retrans I-frame re-transmissions
State Current link status
UnSolResp Received unsolicited responses
TeiRem Terminal Endpoint Identifier removals