Westermo MR Series - Manual (Page 315)

315 6622-3201
Web Interface and Command Line Reference Guide www.westermo.com
Discard Output 4.110.8
This parameter determines whether data received during a call is passed to the DTE or discarded.
It can only be directly set by the remote system and may be used in a variety of circumstances
when the remote DTE is not able to handle a continuous flow of data at high speed.
Option Description
0 Normal data delivery to DTE
1 Output to DTE discarded
Padding after CR 4.110.9
Slower terminal devices, such as printers, may require a delay after each Carriage Return before
they can continue to process data. This parameter controls the number of pad characters (NUL -
ASCII 0) that are sent after each CR to create such a delay.
Option Description
0 No padding characters after CR
1-255 Number of padding characters (NUL) sent after CR
Line Folding 4.110.10
Controls the automatic generation of a [CR],[LF] sequence after a certain line width has been
reached.
Option Description
0 No line folding
1-255 Width of line before the PAD generates [CR],[LF]
Port Speed 4.110.11
This is a “read only” parameter, set automatically by the PAD and accessed by the remote system.
Option Description
15 19,200 bps
14 9,600 bps
12 2,400 bps
3 1,200 bps
Flow Control of PAD (by DTE) 4.110.12
Determines the flow control setting of the PAD by the DTE in the on-line data state.
Option Description
0 No flow control
1 XON/XOFF flow control
3 RTS flow control (not a standard X.3 parameter)