Westermo MR Series - Manual (Page 348)

348 6622-3201
Web Interface and Command Line Reference Guide www.westermo.com
Status > Firmware Versions 6.8
The Status > Firmware Versions page shows the model information and serial number for your
unit and a list of the various firmware modules that are loaded along with the version number for
each module.
Using Text Commands
From the command line the firmware versions can be listed using either ATI5or id?.
Status > W-WAN Module 6.9
The Status > W-WAN Module page displays information about the current status of the W-WAN
module on those models that incorporate one. This includes:
SIM status:
This identifies whether or not a valid SIM card has been installed in the module. It may be one
of the following:
READY - SIM is OK •
SIM PIN - PIN number required •
SIM PUK - SIM blocked (unblocking code required) •
ERROR - SIM is not installed or is faulty •
Signal strength:
This shows the W-WAN signal strength in dBm being received by the module. The range is
-113dBm (min.) to -51dBm (max.)
Manufacturer:
This entry shows the manufacturer of the W-WAN module.
IMEI:
The International Mobile Equipment Identification number of the W-WAN module.
IMSI:
International Mobile Subscriber Identity of the W-WAN module. This can also be queried by
using the text based command “modemcc 0 imsi ?”
ICCID:
Integrated Circuit Card IDentifier of the SIM card. This can also be queried by using the text
based command “modemcc 0 iccid ?”
Firmware:
The version number of the firmware of the W-WAN module.
W-WAN Attachment Status:
This field displays the current status of the module with respect to the W-WAN service. It may
be one of the following:
Not attached - the unit has not connected to a W-WAN service •
Attached - the unit has connected to a W-WAN service •
ERROR - unknown response from W-WAN module •