Westermo MR Series - Manual (Page 101)

101 6622-3201
Web Interface and Command Line Reference Guide www.westermo.com
alert mes sage. To disable email alarms set this value to 0.
Email To:
This parameter is used to specify the email address for the recipient of email alert messages
gen erated by the event logger.
Email From:
This parameter is used to specify the email address for the unit. You will need to set up an email
account with your Internet Service Provider.
Email Subject:
This field should contain a brief description of the email content.
SNMP traps today:
This read-only value maintains a count of how many SNMP trap messages have been sent during
the current day.
Max SNMP traps/day:
The value in this field is the maximum number of SNMP trap messages that the unit can gener-
ate per day. This is intended to prevent messages being repeated frequently when you have set
SNMP trap trigger priority to a low value, i.e. a value that results in many traps occurring in one
day.
SNMP trap trigger priority:
This is the lowest event priority code that will generate an SNMP trap message. For example, if
this value is set to 6, only events with a priority of 6 or higher will trigger an automated SNMP
trap message.
SYSLOG messages today:
This read-only value maintains a count of how many SYSLOG messages have been sent during
the last 24-hour period.
Max SYSLOG messages/day:
The value in this field is the maximum number of SYSLOG (user informational) messages that
the unit can generate per day. This is intended to prevent messages being repeated frequently
when you have set SYSLOG trigger priority to a low value, i.e. a value that results in many
SYSLOG events occurring in one day.
SYSLOG trigger priority:
This is the lowest event priority code that will generate SYSLOG message. For example, if this
value is set to 6, only events with a priority of 6 or higher will trigger an automated SYSLOG
message.
SMS Parameters:
Note:
The following parameters apply only to models with GPRS capability.
SMS messages today:
This read-only value maintains a count of how many SMS messages have been sent during the
last 24-hour period.