Westermo MR Series - Manual (Page 105)

105 6622-3201
Web Interface and Command Line Reference Guide www.westermo.com
Confi gure > Event Logcodes 4.31
This page allows you to edit the logcodes used to describe events entered in the “EVENTLOG.
TXT” pseudo file. If a change is made to the logcodes.txt file, the changes will be saved in the file
logcodes.dif so when a firmware upgrade is performed the changes to the logcodes are retained.
Using the Web Page(s)
The web page shows the following information:
Event Code
The code used to describe the event in the “EVENTLOG.TXT” pseudo file.
Filter Priority
The priority of the event, used to determine whether the event will trigger emails, SMS mes-
sages or SNMP traps.
Description
A description of the event.
Reasons
A list of reasons as to why the event occurred. Not every event has a list of reasons.
Confi guring Events 4.31.1
By clicking on an event, a new page is displayed showing the following parameters:
Priority:
The priority of the event, used to determine whether the event will trigger emails, SMS mes-
sages or SNMP traps.
Analyser snapshot to log drive:
To be used in conjunction with the ana 0 logfile command to send a copy of the ana-
lyser trace to s: or u: on a specific event. See “Secondary log files”.
Attach Analyser:
Selecting “On” will attach a snapshot of the current Analyser trace to an email triggered by this
event, no matter what reason triggered the event.
Analyser Action:
Choose from “Off”: the Analyser trace will continue as normal, “Freeze”: No more logging is
per formed until the email is sent, or “Delete”: The trace is deleted once the email is sent.
Attach Eventlog:
Selecting “On” will attach a snapshot of the current Eventlog to an email triggered by this event,
no matter what reason triggered the event.
Eventlog Action:
Choose from “Off”: the Eventlog will continue to be written as normal, or “Delete”: The
Eventlog is deleted once the email is sent.
Syslog Priority:
This parameter will alter the default syslog priority of the event to that of the value selected.