Westermo MR Series - Manual (Page 326)

326 6622-3201
Web Interface and Command Line Reference Guide www.westermo.com
Statistics > ADSL 5.3
The Statistics > ADSL page contains the following statistics for both upstream and downstream
com munications:
Statistic Description
Cells Cells (packets of ADSL data)
FEC Count Forward Error Correction count
CRC Errors Cyclic Redundancy Code errors
HEC Errors Header Error Control errors
Using Text Commands
To display the current statistics for the ADSL instance enter the command:
at\mibs=adsl..stats
where is 0.
To clear the current statistics for the ADSL instance enter the command:
at\mibclr=adsl..stats
Statistics > ASY Ports 5.4
The Statistics > ASY Ports page contains the following statistics:
Statistic Description
Rx Bytes Received data bytes
Rx Overruns Receive First In First Out overruns, occurs when data was received when
the serial receiver’s input FIFO was full
Rx Aborts Received aborts
Rx Breaks Received breaks, occurs when the received data input is held low for
longer than a full word transmission (defined as start, data, parity and stop
bits).
Rx Framing Errors Received Framing Errors, occurs when a received character does not have
a valid stop bit
Rx Parity Errors Received Parity Errors, occurs when the parity of the received data char-
acter does not match parity selected for the serial port
Buffer Shortages Frames discarded due to lack of system buffer space
Message Shortages Frames discarded due to lack of system message buffers
Tx Bytes Transmitted data bytes
Tx Underruns Transmit First In First Out underruns
Using Text Commands
To display the current statistics for an ASY port enter the command:
at\mibs=asy.
where is 0 -1.
To clear the current statistics for an ASY port enter the command:
at\mibclr=asy.