Westermo MR Series - Manual (Page 107)

107 6622-3201
Web Interface and Command Line Reference Guide www.westermo.com
Confi guring Reasons 4.31.2
By clicking on a reason, a new page is displayed showing the following parameters:
Inherit priority from Event:
By selecting “On”, the priority of the reason will be the same as the Event that was triggered. If
“Off” is selected, the reason takes the priority entered in the Priority parameter.
Priority:
The priority of the reason, if Inherit priority from Event is “Off”.
Attach Analyser:
Selecting “On” will attach a snapshot of the current Analyser trace to an email triggered by this
event with this reason.
Analyser Action:
Choose from “Off”: the Analyser trace will continue as normal, “Freeze”: No more logging is
per formed until the email is sent, or “Delete”: The trace is deleted once the email is sent.
Attach Eventlog:
Selecting “On” will attach a snapshot of the current Eventlog to an email triggered by this event
with this reason.
Eventlog Action:
Choose from “Off”: the Eventlog will continue to be written as normal, or “Delete”: The
Eventlog is deleted once the email is sent.
PPP Mask:
A bitmask (entered in decimal format) that determines which PPP instances the priority for the
rea son will apply. For example, if you wish that only events on PPP0 and PPP3 have the priority
set in the Priority parameter, enter 5 (1010 in decimal).
Log Level:
The priority of the reason, used to determine whether the event will be logged. This is deter-
mined by the value of the Maximum event priority to log parameter set in the Configure >
Event Handler page.
Priority is Conditional on Entity#:
If this parameter is “On”, the event is conditional on which entity triggered the event (e.g. eth,
ppp, etc.). Choose the entity from the Entity drop-down list.
Entity:
See above.
Priority is Conditional on instance#:
Used in conjunction with Priority is Conditional on Entity#. If this parameter is “On”, then the
event is conditional not only upon which entity triggered the event, but on which instance of
the entity, entered in the Instance # parameter. For example, if Priority is Conditional on Entity#
is set to eth, this parameter is “On”, and Instance # is 1, only reasons of this type triggered by
Eth 1 will be triggered.
Instance #:
See above.