Westermo MR Series - Manual (Page 278)

278 6622-3201
Web Interface and Command Line Reference Guide www.westermo.com
Using Text Commands
From the command line, use the tpad command to configure or display TPAD settings. To display
current settings for a TPAD instance enter the command:
tpad ?
To change the value of a parameter use the command in the format:
tpad
The parameters and values are:
Parameter Values Equivalent Web Parameter
uaarc number Unable to authorise acquirer response
ackdat off, on ACK data
bdir off, on Boot to direct mode
bnumber ISDN number B-channel ISDN #
cingnua text Calling NUA
clear_dirtime number Clearing time (direct mode) (ms)
clear_time number Clear Delay (s)
constr text Connect string
cud text Call user data
defpak number Default packet size
delimchar decimal ASCII Delimiter character
delstx off, on Delete STX/ETX
dialctx number Dialling context
disdir off, on Disable direct mode
domsgnb off, on Message numbering
dorest off, on Restarts
dotermid off, on Terminal ID translation
dsync off, on Direct sync
eot_only off, on EOT only
fpar off, on Force parity ASY
ftime number Forward mode time (s)
inclrc off, on Include LRC
ipaddr IP address Remote IP address
iphdr 0,1,2 IP length header: 0=Off 1=On 2=8583 Ascii 4 byte
ipmode 0,1 IP mode: 0=XOT 1=TCP socket mode
ipport number IP port (TCP socket mode)
l2iface lapb, lapd, tcp, ssl, vxn Layer 2 interface
l2nb 0-1 Layer 2 interface #
lcn number LCN
lcnup off, on LCN direction
lfpar off, on Force parity line
lrpar off, on Strip parity line
merchnum text Merchant #
no_enq off, on No ENQ char
nua text NUA
nui text NUI
pollchars text Poll characters
prefix number Prefix #
prefix_rem number Prefix removal #