Westermo MR Series - Manual (Page 233)

233 6622-3201
Web Interface and Command Line Reference Guide www.westermo.com
Source IP address interface #:
See above.
DLSw Window:
This parameter is used to set the DLSw window size. The value range is from 10 to 100 with
the default being 20.
Ignore Unsolicited Responses:
When this parameter is set to “On”, the unit will ignore unsolicited response frames.
Using Text Commands
From the command line, use the snaip command to display or configure SNAIP parameters. To dis-
play the current settings for the SNAIP instance enter the following command:
snaip ?
where is the number of the SNAIP instance.
To change the value of a parameter use the following command:
snaip
The parameters and values are:
Parameter Value Equivalent Web Parameter
ans off, on Answering
autocontact off, on Auto contact
dcd_toggle off, on DCD Toggle
descr text Description
dlswwindow 10-100 DLSw Window
dsaps numbers DSAPs
dtemode 0,1 DTE/DCE mode: 0=DCE 1=DTE
inc_mac_exc off, on Include Mac Exclusivity Capability
ipaddr IP address IP address
iunsolresp off, on Ignore Unsolicited Responses
l1iface ISDN, Port, SharedPort Layer 1 interface
l1nb 0 Sync port
master off, on Master
msn number MSN
n400 number N400 counter
passive off, on DLSw Role: Off=Active On=Passive
peervmac MAC address Peer VMAC
pollresp number Polling Response(msec)
protocol LAPB, SNA, RAW, RAW_NOHDR Protocol
r_ipport number Read port
saps numbers SAPs
send_xid_null off, on Send Null XID
sock_inact number TCP socket inactivity timer (s)
srcipadd number Source IP address interface #
srcipent “”, PPP, ETH Source IP address interface
stations numbers Polling stations
sub IP address Sub-address
t1time number T1 timer (ms)
t200 number T200 timer (ms)