KEYENCE Visual KV Series - Manual (Page 418)

Appendix B Specifications and Dimensions KV-300 Series
Appendicies
Appendices
1-394
AC Power supply module/DC power distribution module
Note 1: Do not install both the KV-U4 and KV-U5 within one system.
Note 2: The KV-U5 power supply interface module distributes 24 VDC to the
modules in the system. It requires a 24 VDC output power supply of sufficient output
current capacity.
Note 3: Install the KV-300 CPU to the right of the KV-U4/U5.
For KV-10/80 users
System specifications
Item Specifications
Model KV-U4 KV-U5
Input supply voltage 100 to 240 VAC ±10% (50/60 Hz) 24 VDC ±10%
Output voltage 24 VDC ±10% –
Maximum output 1.4 A (Total of power supplied to connected 3.5 A
current modules and service power supply)
Model KV-10R(W)/10T(2W) KV-16R(W)/16T(2W) KV-24R(W)/24T(2W) KV-40R(W)/40T(2W) KV-80R(W)/80T(W)
Arithmetic and Stored program
control system
Programming Ladder diagram and extended ladder diagram
language
Number of Basic: 16, application :34, arithmetic: 26, interrupt: 4 (8 programs)
instructions
Execution time 1.0 µs min., 1.92 µs average 1.4 µs min., 3.12 µs average
(basic I/O
instructions)
Avg. number of 500 steps/program 3000 steps/program
steps
Input 6 inputs (70 max.) 10 inputs (74 max.) 16 inputs (80 max.) 24 inputs (72 max.) 48 inputs (80 max.)
Output 4 outputs (68 max.) 6 outputs (70 max.) 8 outputs (72 max.) 16 outputs (64 max.) 32 outputs (80 max.)
Internal utility 160 800
relays (with
latching function)
Special utility 160
relays
Data memory 1000 words 2000 words
(16 bits)
Temporary memory 32 words
(16 bits)
Timer/counter A total of 64 timers, up-counters, A total of 120 timers, up-counters, and up-down counters are
and up-down counters are provided provided as follows:
as follows:
0.1-s timer (0 to 6553.5 s)
0.1-s timer (0 to 6553.5 s)
0.01-s timer (0 to 655.35 s) 0.01-s timer (0 to 655.35 s)
1-ms timer (0 to 65.535 s) 1-ms timer (0 to 65.535 s)
1 analog timer 2 analog timer
(0 to 24.9 s, 0 to 2.49 s, or 0 to 0.249 s) (two of 0 to 24.9 s, 0 to 2.49 s, or 0 to 0.249 s)
High-speed counter 2 auto-reset up-counters (max. input response frequency: 10 kHz)
High-speed counter 4
comparator
Direct clock pulse 2 kHz max. (output from 0500), 1.5 kHz max. (output from 0501) 20 kHz max. (output
from 0500), 1.5 kHz
max. (output from
0501)
Memory switch 16
Memory backup Program memory: EEPROM, programs retained for 10 years min., rewritable 50,000 times min.
Data memory: data retained for 2 months min. by capacitors (at 25°C (77°F))
Expansion unit 4 units (max.) 3 units (max.)
Self-diagnosis CPU and RAM errors
Peripherals Handheld programmer KV-P3E(01), memory cards M-2 & M-3, card driver Z-1
KVHKA Appendix.p65 08.3.11, 11:05 AM 394