KEYENCE Visual KV Series - Manual (Page 251)

6.3 Functions
Chapter 6 Handheld Programmer
1-227
1 6
ON
OFF
LD
7
SET
1
ENT
R-SRCH FNC Relay No.
Key operation Display Description
RUN
Initial display (RUN mode)
FORCED SET/RESET Access the RELAY ON/OFF [FORCED SET/RESET]
00000 function. ON/OFF status of input relay 0000 is displayed.
FORCED SET/RESET Specify output relay 500. (OFF)
00500
FORCED SET/RESET
Force output relay 500 ON.
00500
FORCED SET/RESET
Specify CTR001. (ON)
CTR001
FORCED SET/RESET
Force CTR001 OFF.
CTR001
RUN
Return to initial display of RUN mode.
FNC
ENT
R-SRCH
CLEAR
SET
1
RES
0
ANB
5
RES
0
ON
SET
1
OFF
LD
7
CTR
(C)
Key operation
Basic operation
Example of operation (In the RUN mode)
WRITE INTO DATA MEMORY PROGRAM mode
(DM WRITE) [FNC72] RUN mode
Function
Displays current data stored in data memory for monitoring, or changes it.
•
Pressing @
#, $
alternates between decimal input and hexadecimal input.
• The data stored in the temporary memory can also be displayed and changed.
(Note that data cannot be written into TM30 and TM31.)
Key operation
Basic operation
Example of operation (In the RUN mode)
Pressing [ENDH/TM] displays the data in the temporary memory, while pressing
[ENDH/TM] displays the data in the data memory.
#, $
LD
7
ANL
2
ENT
R-SRCH FNC Data memory No. ENT
R-SRCH ENT
R-SRCH Data value to be written @
Key operation Display Description
RUN
Initial display (RUN mode)
DM VALUEM #00000 Access WRITE INTO DATA MEMORY [DM WRITE] function.
DM0000 Current data stored in DM000 is displayed on upper column.
DM VALUEM #00010
Specify DM003 to display data stored in it.
DM0003 #00000
DM VALUEM $000A
Change decimal display to hexadecimal display.
DM0003 $0000
DM VALUEM $000A
Enter desired data.
DM0003 $00FF
DM VALUEM $00FF
Data has been written.
DM0003
DM VALUEM #00255
Change hexadecimal display to decimal display.
DM0003
RUN
Return to initial display of RUN mode.
FNC ENT
R-SRCH
CLEAR
ANL
2
ENT
R-SRCH
ENT
R-SRCH
LD
7
ORL
3
@
#, $
F
W-ON
F
W-ON
@
#, $
KVHKA Chap 06_3&4&5.p65 08.3.11, 11:17 AM 227