KEYENCE Visual KV Series - Manual (Page 352)

8.4 Programming KV-300 Series Only
KV
-300
KV-10/80
Chapter 8 KV-AN6 Analog I/O Module
1-328
8
8.4.9 Converting Analog Input to Analog Output
The following example describes how to fetch analog input and output it as analog
data.
Example
Fetch signals from analog input ch. 0 of the KV-AN6 module no. 1 and output the
signals as analog data to analog output ch. 4.
Select either voltage-to-current conversion or current-to-voltage conversion, using
the range selection switches. For the range setting, refer to page 1-319.
Ladder diagram
Fetches analog input
and outputs it as
analog data. 2002 DM9000
LDA
2002 2009 DM9000
LDA
$8000
CMP
2009
COM
#00001
ADD
#00016
DIV
DM0001
STA
#00016
DIV
DM0000
STA
DM9004
STA
#00005
MUL
#00005
MUL
➮ For assignment of data memory addresses, refer to page 1-324.
When analog input is
positive, writes the
data value x 1000 into
DM0000.
(In the diagram) Let
the complement of
two be true.
When analog input is
negative, writes the
data value x 1000 into
DM0001.
KVHKA Chap 08.p65 08.3.11, 11:19 AM 328