KEYENCE Visual KV Series - Manual (Page 238)

6.2 Basic Operations
Chapter 6 Handheld Programmer
1-214
6
MULTI MONITOR
DM0001 45678
MULTI MONITOR
DM0001
Decimal display
Binary display
MULTI MONITOR
DM0001 $B26E
MULTI MONITOR
Hexadecimal display
ASCII display
#, $
@
#, $
@
#, $
@
#, $
@
2 15 2 0
Binary display: ..... ON(1) ..... OFF(0)
DM0001
M U L T I M O N I T O R
0 1 0 0 5
Binary display
1104 1005
C
H
→
Enter element to be moni-
tored (relay contact, timer,
counter, data memory, or
channel.)
→
Press [INS]
to select
"REPLACE"
or "INSERT". Press [ENT/
R-SRCH].
→
→ Press [DEL].
Press [ENT/
R-SRCH].
→
→
F T M 0 1 0 0 0 2 1
0 0 0 0 1
Fixed display
Fixed display
Example
When the current value of data memory 1 is monitored (current value = 45678):
Here, "channel" means 16 contacts starting with an arbitrary contact.
Example
"1005ch" means 16 contacts of 1005 through 1015, and 1100 through 1104.
Changing registered element
Overwriting or inserting
Deleting
Fixed display
When monitoring by scrolling up or down using [↑/ON] or [↓/OFF], you can fix the
desired data on the upper line of display while scrolling only the lower line.
To cancel the fixed display, press *
FIX
again.
Move cursor
to desired
line to using
ON
or
OFF
.
Move cursor
to desired
line to using
ON
or
OFF
.
Move cursor
to desired
line to using
ON
or
OFF
.
Same data remains
displayed on upper
section of display.
Program scrolls only on
lower section of display.
Press *
FIX
.
KVHKA Chap 06_1&2.p65 08.3.11, 11:16 AM 214