Rockwell Automation 2098-UWCPRG Ultraware Software User Manual - Manual (Page 299)

Rockwell Automation Publication 2098-UM001G-EN-P - February 2011 301
Creating and Running Programs Chapter 6
3. Use the Project window to edit these parameter values for the project
selected in the Workspace window.
4. Click Revert to undo any changes.
Parameter Description
Name Edit the project's name. The name of the project must:
• be at least one, but not more than eight, characters in length,
• be unique within its branch of the tree, and
• not contain a space or backslash (\), forward slash (/), colon
(:), asterisk (*), question mark (?), double quote (“), greater
than symbol (>), less than symbol (<) or pipe (|).
Powerup Mode The action you want an online drive (a drive in the On-Line
Drives branch of the Workspace window) to take with respect to
the selected project's child executable program (.exe) file:
• Run, to automatically run the program when power is first
applied to the online drive, or
• Idle, to not run the program on powerup. Idle is the default
setting.
Targeted Firmware The firmware revision that the program built from this project
will run under.
Understanding the Service Information Window
on page 217 describes how a drive's firmware revision can be
verified in the Status display.
Note: If the user attempts to run a program under an earlier
revision of firmware than it was built for, an error message is
displayed and the program will not run.
Compiler Version The compiler version to use when building a program.
Note: The new revision of the compiler (version 2.x) significantly
reduces the size of most program files. However, the original
compiler (version 1.x) is still provided because it is possible that
a program developed under the 1.x compiler may have build
errors under the 2.x compiler, or may have slight differences in
how it runs.