Rockwell Automation 2098-UWCPRG Ultraware Software User Manual - Manual (Page 295)

Rockwell Automation Publication 2098-UM001G-EN-P - February 2011 297
Configuring the Kinetix 3 Drive Chapter 5
Understanding the Service
Information Window The Service Information window looks like this.
Use the Service Information window to:
• display and monitor service information about the drive.
• display the firmware revision of the drive.
The following parameters and status apply to the Service Information window.
Customize the Service Information window for your Kinetix 3 Drive by selecting
one or more of these commands:
• Click Show Status to display or hide the Status pane.
• Click Setup to open the Monitor Setup window, where you can customize
the status display for this window.
• Click Revert to return parameter settings to the values they held when you
opened this window.
Status Description
Drive Model The model number of the drive. This is the number you selected
from the Select New Drive dialog box after executing the Insert
Kinetix 3
command.
Firmware Version The revision of the selected On-Line drive’s firmware in the
format XX.YY, where:
• XX = major revision
• YY = minor revision
CPLD Version The revision of the CPLD device in the drive