Rockwell Automation 2098-UWCPRG Ultraware Software User Manual - Manual (Page 108)

110 Rockwell Automation Publication 2098-UM001G-EN-P - February 2011
Chapter 3 Configuring the Ultra3000 Drive
The following commands can be executed for the Oscilloscope window of an
online drive:
Customize the Oscilloscope window for your Ultra3000 Drive by selecting one
or more of these commands:
• Click Show Properties to display or hide the Properties pane.
• Click Show Commands to display or hide the Commands pane.
• Click Save to save the oscilloscope data to a tab delimited file on your PC,
that can be read by spreadsheet or presentation software. Information
saved includes the Oscilloscope data points from one or more channels.
• Click Revert to return parameter settings to the values they held when you
opened this window.
Oscilloscope Display
Y-axis Labels The labels to display on the y-axis:
• Default: One reference point for each channel is displayed.
• Channel A
• Channel B
• Channel C
• Channel D
Legend Displays the color of the trace for each input signal or channel.
Click the color rectangles displayed in the legend to modify a
color.
Command Description
Arm Trigger Turns the oscilloscope trigger ON.
Run Continuous Runs the oscilloscope continuously, circumventing the trigger.
Stop Triggering Turns the oscilloscope trigger OFF.
Parameter Description