Festo Электромотор MTR-DCI - Manual (Page 16)

Contents and general safety instructions
XIV
Festo P.BE-MTR-DCI-CO-EN en 1209a
Manuals on motor unit type MTR-DCI
This description contains information on the method of
operation, as well as on mounting, installation and
commissioning of electric valve actuators with motor unit
type MTR-DCI-...-CO (CANopen interface).
Information on components, e. g. reference switches, can be
found in the operating instructions for the relevant product.
Type Designation Content
Operating package with
brief description +
descriptions (+
commissioning software)
on CD ROM P.BP-MTR-DCI Brief description: Important instructions
on commissioning and preliminary
information.
Descriptions on CD ROM: Contents as
described below
Description Motor unit MTR-DCI with
CANopen interface
P.BE-MTR-DCI-CO-... Installation, commissioning and
diagnosis of electric axes with motor
unit MTR-DCI; communication via
CANopen interface.
Help system for software Festo Configuration Tool
help (contained in FCT
software) Function description of the Festo Con-
figuration Tool (FCT) configuration soft-
ware.
Operating instructions Axes
e. g. DMES-... / DNCE-... Installing and commissioning the axes
Further descriptions Motor unit MTR-DCI with
other communication in-
terfaces e.g.
P.BE-MTR-DCI-IO-...
P.BE-MTR-DCI-PB-... Installing, commissioning and diagnos-
ing electric axes with motor unit MTR-
DCI; communication via I/O interface or
via the relevant field bus.
Tab. 0/1: Documentation on the MTR-DCI