IAI America RCM-101-USB - Manual (Page 7)

Supported Models
The PC software RCM-101-MW and RCM-101-USB supports the following controller models of the specified
versions and later.
Table 1 List of Supported Models
Model Name Initial Supported Version
RCP *1 V1.00.00.00
RCS *1 V3.00.00.00
E-Con *1 V3.00.05.00
RCP2 *1 V4.00.00.00
ERC *1 V4.00.00.00
ERC2 V6.00.00.00
ERC3 V8.03.00.00
PCON-C/CG/CF V6.00.00.00
PCON-CA V8.03.00.00
ACON V6.00.00.00
SCON-C V6.00.00.00
SCON-CA V8.00.00.00
ROBONET V6.00.04.00
ASEP *2 V7.00.00.00
PSEP *2 V7.00.00.00
DSEP *2 V8.04.00.00
MSEP *3 V9.01.00.00
MSCON V9.02.00.00
*1: This PC software also supports the RCP, RCS,
E-Con, RCP2, and ERC controllers.
(Note) Confirm the connected model and version of this application. If any unsupported model is connected, it
may operate unexpectedly.
(Note) ERC2, ERC3, PCON, ACON, SCON or MSCON cannot be used by linking with any model shown in *1, *2
and *3.
Models in *1, *2 and *3 cannot be linked with each other.
The software reset function is effective for models corresponding to V4.00.00.00 or later of the supported version.