IAI America RCM-101-USB - Manual (Page 102)

6. Initial Setting and Position Data Editing for SEP
Controllers
90
6.2.2 Offline Mode
When editing data after creating new data or loading data from a file, you are editing the data in the offline
mode.
In this mode, the window controls relating to axis operation are grayed out, and only the tool buttons and
position data input area become active. Items that cannot be operated offline are grayed out.
(1) Creating new position data
To create new position data, click File from the main menu, and then select New.
[1] When the position data format selection window appears, select the controller whose position data you
want to create, and then click OK.
Fig. 6.26 Position Data Format Selection Window
[2] The IO pattern select window appears.
Select the operation pattern in which to create new position data.
Fig. 6.27 IO Pattern Select Window