IAI America RCM-101-USB - Manual (Page 248)

13. Frequency
Analysis Function for SCON-CA
Controller
Anti-V
ibration Control
236
• Print data graph
The analysis data graph currently displayed in the “sampling” window is printed in the format specified
below.
Fig. 13.39 Printing Format of Analysis Data Graph
(Note) Different options can be selected in the “Print setting for measurement data” area and “Print setting
for analysis data” area, respectively.
[3] Print setting for FFT result data
Fig. 13.40 Print Setting for FFT Analysis Result Data
In this area, print setting for FFT analysis result data is performed.
The printing format of FFT analysis result data is shown in the figure on the next page.
The function of each setting item is the same as in [1], “Print setting for measurement data” and [2], “Print
setting for analysis data.”
The setting unit of fields in the “Setting for print list range” area is [Hz].
Print type selection
Setting for print list range