IAI America RCM-101-USB - Manual (Page 31)

1. Preparation Before Use
19
[22] Click Start on the Windows taskbar, Settings, and then Control Panel to open the Control Panel.
Double-click System to open System Properties.
Click the Hardware tab in System.
Click Device Manager in Hardware.
Double-click Ports (COM & LPT) in Device Manager to expand the folder tree.
If there is IAI USB to UART Bridge Controller (COM?) under Ports (COM & LPT) in Device Manager,
the driver has normally been installed and operated.
(Note) The number added to the end of COM? becomes the number of the inserted COM port.
Fig. 1.31 Device Manager Window