IAI America RCM-101-USB User Manual
Page 221
12. Off Board T
uning Function on SCON-CA
Controller
209
[2] Test run result Graph Display Area
Fig. 12.74 Test run result Graph Display
Tool button
Fig. 12.75 Tool button (Takt Time Calculation Window)
Zoom in/out of Vertical Axis
Click this button to zoom in/out the vertical axis of the operation graph.
Zoom in/out of Horizontal Axis
Click this button to zoom in/out the horizontal axis of the operation graph.
Displayed Data Switchover
The data (velocity/position) shown on the takt time calculation result graph can be switched over with
this radio button.
Also, by putting a check mark in Rated cur ratio check box, the waveform for the rated current ratio can
be displayed on the takt time calculation result graph.
Test run result Graph
Tool button