IAI America RCM-101-USB - Manual (Page 159)

11. Smart T
uning Function (V
ersion V8.03.00.00 or Later)
147
(2) Carrier load Select Window
Set the carrier load in this window. After setting, click Next.
Fig. 11.57 Carrier load Select Window
[1] Carrier Load Indication Method Select
Assign carrier load
Indicate the carrier load with the value directly input.
This is the only way to select for PCON-CA and ERC3.
It calculates by the system identification.
This cannot be used for PCON-CA and ERC3.
[2] Carrier Load Indication
Input a value to set the carrier load.
[3] System Identification Setting
This cannot be used for PCON-CA and ERC3.
[4] System Identification Result
This cannot be used for PCON-CA and ERC3.
[1] Carrier Load Indication
Method Select
[2] Carrier Load
Indication
[3] System Identification
Setting
[4] System Identification
Result