Avago Technologies LSI SAS 3041E-R - Manual (Page 88)

4-10 NetWare Drivers
Version 1.3 Copyright © 2001, 2002, 2007 by LSI Logic Corporation. All rights reserved.
4.3.2.7 Using the Synchronous SCSI Option
•
Syntax: synchronous=[targetIDlist] or
sync=[targetIDlist] or
sync=[targetIDlist] or
speed=[targetIDlist]
•
Default value: Maximum of the HBA
Examples of rate specifier are:
0 MB or 10 MB (megabytes per second)
20 MT or 40 MT (mega transfers per second)
•
Valid entries:
0 = asynchronous
5 = 5 mt/sec
10 = 10 mt/sec
20 = 20 mt/sec
40 = 40 mt/sec
80 = 80 mt/sec
160 = 160 mt/sec
OFF = asynchronous
ASYNC = asynchronous
MAX = Adapter maximum rate
•
Function: Sets synchronous transfer rate for specified target(s).
•
Possible Impact: Could cause a device to operate slower than its
maximum speed.
This synchronous SCSI option allows you to enable/disable support of
Fast, Ultra, Ultra2, Ultra160 and Ultra320 SCSI synchronous data
transfers when using a Fast, Ultra, Ultra2, Ultra160, or Ultra320 SCSI
controller. Synchronous data transfers increase the I/O performance of a
system.
4.3.2.8 Using the Verbose Option
•
Syntax: verbose=[targetIDlist]
•
Default value: off
•
Valid entries: on, off
•
Function: Displays more detailed information on options and DOS
configuration.