Avago Technologies LSI SAS 3041E-R - Manual (Page 48)

3-8 UNIX Operating System Device Drivers
Version 1.3 Copyright © 2001, 2002, 2007 by LSI Logic Corporation. All rights reserved.
3.2.2 Driver Features and LSI Device Support
The Solaris SPARC Fusion-MPT driver supports these features:
•
State-of-the-art Fusion-MPT interface, providing support for Fibre
Channel, SCSI, SAS, and RAID devices with a single binary image
•
Highly efficient, low CPU usage architecture
•
Multiple host adapters
•
Multiple Logical Unit Numbers (LUNs)
•
Scatter-Gather
•
Disk array configurations with no LUN 0
•
Disk array configurations with non-contiguous LUNs
•
Multiprocessor environments
The LSI Solaris SPARC driver supports the following LSI host adapters:
•
Fibre Channel: LSI7104XP, LSI7204XP, LSI7404XP, LSI7104XLP,
LSI7204XLP, LSI7102XP, LSI7202XP, LSI7402XP, LSI7402EP,
LSI7102XLP, LSI7202XLP, LSI44929, LSI44919
•
SCSI: LSI22320-R, LSI21320-R, LSI20320-R
•
SAS (Serial Attached SCSI): LSI3041X, LSI3442X, LSI3080X,
LSI3800X
The LSI Solaris SPARC driver supports the following LSI microchip
controllers:
•
LSIFC949X, LSIFC929X, LSIFC919X, LSIFC929, LSIFC919
•
LSI53C1030, LSI53C1020
•
LSI1064, LSI1064E, LSI1068, LSI1068E
3.2.3 Preparing to Install the Solaris SPARC Driver
Table 3.1 lists the Solaris SPARC system resources that are required in
order to install a supported LSI host adapter and the Solaris SPARC
driver.