Avago Technologies LSI SAS 3041E-R - Manual (Page 209)

Configuration Utility Menu Screens 10-7
Version 1.3 Copyright © 2001, 2002, 2007 by LSI Logic Corporation. All rights reserved.
Figure 10.2 shows the Boot Adapter List menu.
Figure 10.2 Boot Adapter List Menu
•
To add an adapter to the boot list, press Insert. This moves the
cursor to the adapter select list in the lower part of the screen. Use
the arrow keys to select an adapter and press Enter to add it to the
end of the Boot Adapter List in the upper part of the screen.
•
To remove an adapter from the boot list, select the adapter and press
Delete.
•
To decrease the adapter’s relative order in the boot list, select the
adapter and press the minus (-) key on the keypad.
•
To increase the adapter’s relative order in the boot list, press the plus
(+) key on the keypad.
Table 10.3 describes the fields of the Boot Adapter List menu.
LSI Logic PCI Configuration Utility Version FC MPTBIOS-x.xx
Boot Adapter List
Insert=Add an adapter Delete=Remove an adapter
Adapter PCI Dev/ Boot Current Next
Bus Func Order Status Boot
LSIFC929X 0 60 [0] On [On]
LSIxxxxxx 0 90 [1] Off [Off]
LSIxxxxxx 0 98 [2] On [On]
LSIxxxxxx 0 A0 [3] On [On]
Press Insert to select an adapter from this list:
Table 10.3 Boot Adapter List Field Descriptions
Field Description
Adapter The model number of the adapter. To invoke the Adapter Properties menu for an
adapter, select an adapter and press Enter.
PCI Bus The PCI Bus number (0x00–0xFF) that the system BIOS assigns to an adapter.
PCI Dev/Func The PCI Device/Function that the system BIOS assigns to an adapter. Bits [7:3]
indicate the Device number (0x00–0x1F). Bits [2:0] indicate the Function number (0–7).