Avago Technologies LSI SAS 3041E-R - Manual (Page 184)

9-18 Fusion-MPT SAS BIOS and Setup Utility
Copyright © 2001, 2002, 2007 by LSI Logic Corporation. All rights reserved.
The reassignment options are as follows:
•
Yes: Reassign only this block. If another block needs to be
reassigned in the future, display the prompt again.
•
No: Do not reassign this block. If another block needs to be
reassigned in the future, display the prompt again.
•
All: Reassign the current block, and automatically reassign other
blocks that needs it, without displaying the prompt again.
•
nonE: Do not reassign the current block or automatically reassign
any other blocks that need it. Do not display the prompt again.
•
Cancel: Do not reassign anything, and stop the Verify process.
9.3.9 Advanced Adapter Properties Menu
The Advanced Adapter Properties menu allows you to view and modify
infrequently accessed adapter settings.
Figure 9.11 shows this menu.
Figure 9.11 Advanced Adapter Properties Menu
LSI Logic MPT Setup Utility v6.xx.xx.xx
Advanced Adapter Properties -- SAS1068
IRQ 0B
NVM Yes
IO Port Address 9000
Chip Revision ID 00
Spinup Delay (Secs) [ 2]
CHS Mapping [SCSI Plug and Play Mapping]
Link Error Threshold Threshold
Settings Count Time(Secs)
Invalid DWORDs 0 0
Loss of DWORD Sync 0 0
Running Disparity Errors 0 0
PHY Reset Errors 0 0
Advanced Device Properties
PHY Properties
Restore Defaults
Esc=Exit F1/Shift+1=Help
Enter = Select Item -/+ = Change Item