Avago Technologies LSI SAS 3041E-R - Manual (Page 207)

Configuration Utility Menu Screens 10-5
Version 1.3 Copyright © 2001, 2002, 2007 by LSI Logic Corporation. All rights reserved.
10.3.2 Main Menu
When you start the CU, the Main Menu appears, as shown in
Figure 10.1 . This menu displays a scrolling list of up to 256 installed LSI
host adapters and information about each of them.
Figure 10.1 FC BIOS CU Main Menu
Use the arrow keys to select an adapter, then press Enter to view and
modify the selected adapter’s properties (and to access the other
menus). After you select an adapter and press Enter, the CU scans the
FC link bus and the Adapter Properties menu appears (see
Section
10.3.5, “Adapter Properties Menu” ).
Esc Abort/Exit Aborts the current operation and/or exits the current screen. The user is
asked to confirm, if changes have been made.
Enter Execute Item Executable items are indicated by highlighted text and a different back-
ground color. Press Enter to execute the field’s associated function.
Selections that are not currently permissible are grayed out. The menu
descriptions below include information on their executable items.
Table 10.1 User Input Keys (Cont.)
Key Definition Description
LSI Logic PCI Configuration Utility Version FC MPTBIOS-x.xx
LSI Logic Host Bus Adapters
Adapter PCI Dev/ Port IRQ NVM Boot LSI Logic
Bus Func Number Order Control
F600 5 Yes 2 Enabled
F400 10 Yes 0 Disabled
F800 9 Yes 1 Enabled
E800 11 Yes 3 Enabled