Avago Technologies LSI SAS 3041E-R - Manual (Page 179)

Setup Utility Menu Screens 9-13
Copyright © 2001, 2002, 2007 by LSI Logic Corporation. All rights reserved.
9.3.6 Expander Properties Menu
The Expander Properties menu displays information about a specific
expander, as shown in
Figure 9.7 . To access this menu, press Alt+E on
the SAS Topology menu when the cursor is on the Device Identifier field
of an expander.
Figure 9.7 Expander Properties Menu
Target
Capabilities The target capabilities for this device. The possible values are as follows:
•
SATA: Serial ATA Protocol
•
SSP: Serial SCSI Protocol
•
STP: Serial ATA Tunneling Protocol
•
SMP: Serial Management Protocol
Initiator
Capabilities The initiator capabilities for this device. The possible values are as follows:
•
SATA: Serial ATA Protocol
•
SSP: Serial SCSI Protocol
•
STP: Serial ATA Tunneling Protocol
•
SMP: Serial Management Protocol
Table 9.5 SAS Topology Field Descriptions (Cont.)
Field Description
LSI Logic MPT Setup Utility v6.xx.xx.xx
Expander Properties -- SAS1068
Device Identifier LSILOGICSASx12 A.0
Number of Phys 0C
SAS Address 500605B0:00001290
SAS Level 01
Configurable Routing Table Yes
Expander Change Count 001C
Maximum Route Indexes per Phy 0090
Expander Target Capabilities SMP
Expander Initiator Capabilities None
Discovery Status 00000000
Esc=Exit F1/Shift+1=Help