Avago Technologies LSI SAS 3041E-R - Manual (Page 157)

Creating RAID Arrays 8-19
Version 1.3 Copyright © 2001, 2002, 2007 by LSI Logic Corporation. All rights reserved.
Figure 8.8 SCSI Device Properties: Part 3
Table 8.8 describes the fields in the Device Properties menu.
LSI Logic MPT Setup Utility Version vx.xx
Device Properties
SCSI Device Identifier Verify Restore
ID Defaults
0 -
1 -
2
3 SEAGATE ST31055N
4 -
5 -
6 -
7 53C1010-33
8 -
9 -
10 -
11 -
12 -
13 -
14 -
15 -
<< Scroll Indicator >>
Table 8.8 SCSI Device Properties Field Descriptions
Field Description
SCSI ID The SCSI ID of the SCSI device.
Device Identifier The ASCII device identifier string from the device’s Inquiry Data.
MB/sec Maximum synchronous data transfer rate, in megabytes per second. Values range
from 0 (async/narrow) to 320 (default) for Ultra 320.
You cannot change the value in this field, but it is updated when the Data Width or
MT/sec fields are changed.
MT/sec Maximum synchronous data transfer rate, in megatransfers per second. See
Table 8.9 for details.
Data width Maximum data width, in bits: either 16 (default) or 8.
Scan ID Indicates whether to scan for this SCSI identifier at boot time. The default is Yes. Set
this option to No if there is a device that you do not want to be available to the
system. Also, you can decrease boot time by changing this setting to No for unused
SCSI IDs.