4 exiting the fibre channel configuration utility, Exiting the fibre channel configuration utility – Avago Technologies LSI SAS 3041E-R User Manual
Page 216

10-14
Fibre Channel BIOS and Configuration Utility
Version 1.3
Copyright © 2001, 2002, 2007 by LSI Logic Corporation. All rights reserved.
10.4 Exiting the Fibre Channel Configuration Utility
Some configuration changes take effect only after the system reboots.
Therefore, it is important to exit the configuration utility properly. To exit,
press Esc and respond to the verification prompts. Some changes might
be lost if you reboot before properly exiting the CU.
This manual is related to the following products:
- LSI SAS 3041X-R LSI SAS 3080X-R LSI SAS 3081E-R LSI SAS 31601E LSI SAS 3442E-R FusionMPT_DevMgrUG.pdf LSI SAS 3442X-R LSI SAS 3800X LSI SAS 3801E LSI SAS 3801X LSI SAS 3041X-R (Channel) LSI SAS 3080X-R (Channel) LSI SAS 3081E-R (Channel) LSI SAS 3442E-R (Channel) LSI SAS 3442X-R (Channel) LSI SAS 3800X (Channel) LSI SAS 3801E (Channel) LSI SAS 3801X (Channel) LSI20160 LSI20160 (Channel) LSI20320 LSI20320-R LSI20320-R (Channel) LSI20320IE LSI20320IE (Channel) LSI21320-R LSI21320-R (Channel) LSI22320-R LSI22320-R (Channel) LSI22320SE LSI22320SE (Channel) LSIU320 LSIU320 (Channel) LSI53C1020