Avago Technologies LSI SAS 3041E-R - Manual (Page 178)

9-12 Fusion-MPT SAS BIOS and Setup Utility
Copyright © 2001, 2002, 2007 by LSI Logic Corporation. All rights reserved.
Figure 9.6 SAS Topology Menu: Part 3
Table 9.5 describes the SAS Topology menu fields.
LSI Logic MPT Setup Utility v6.xx.xx.xx
SAS Topology -- SAS1068
Device Identifier Target Initiator
SAS1068(03:03:00) Capabilities Capabilities
-PHY 0 FUJITSU MAV2036RC SSP
-PHY 1
-PHY 2
-PHY 3 SEGATE ST936701SS SSP
-PHY 4
-PHY 5 LSILOGICSASx12 A.0 SMP
-PHY 0 SAS1068(03:03:00) SATA,SMP,STP,SSP
-PHY 1
-PHY 2
-PHY 3 ATA Maxtor 6y080M0 1EW0 SATA
-PHY 4
-PHY 5
-PHY 6
-PHY 7
-PHY 8
-PHY 9
-PHY 10
-PHY 11
-PHY 7
Esc=Exit F1/Shift+1=Help Alt+M = More Keys
Alt+D= Device Properties Alt+E= Expander Properties
Table 9.5 SAS Topology Field Descriptions
Field Description
Device Identifier The ASCII device identifier string from the device’s inquiry data.
Discovery Status The status of SAS topology discovery on this direct attached PHY or on an
expander. This field is only an indicator of an error being encountered. For specific
details and the error value, see the Expander Properties page for expanders and
the PHY Properties page for direct attach PHYs.
Device Info Indicates if a device is SAS or SATA, and if the device has been selected as the
boot device.
Negotiated Link
Speed The negotiated link speed for this PHY, in Gbits/s. This field also indicates if the
PHY has been disabled.
Maximum Link
Speed The maximum hardware link rate possible for this PHY, in Gbits/s.