Avago Technologies LSI SAS 3041E-R - Manual (Page 37)

Windows Server 2003 Drivers 2-15
Version 1.3 Copyright © 2001, 2002, 2007 by LSI Logic Corporation. All rights reserved.
4. Insert the CD-ROM containing the Windows Server 2003 driver
required to support your LSI adapter(s) and press Enter.
The screen lists three driver selections:
– LSI Fusion-MPT xxx Driver (Server 2003 32-bit)
– LSI Fusion-MPT xxx Driver (Server 2003 IA-64)
– LSI Fusion-MPT xxx Driver (Server 2003 AMD64)
(where xxx is SCSI, FC, or SAS, depending on which driver is being
installed)
5. Select the driver that matches the processor architecture of the
system (32-bit, IA-64, or AMD64). For Intel EM64T architecture
processors, use the AMD64 driver.
6. Press Enter to continue. You are returned to the Windows Server
2003 Setup screen.
7. Press Enter to continue.
The message about setup loading files appears.
8. Follow the Microsoft Windows Server 2003 installation procedure at
this point.
2.3.5 Installing the Driver on an Existing Windows Server 2003 System
Follow these steps to install or upgrade the LSI_xxx.SYS drivers onto an
existing Windows Server 2003 system.
Note: When an LSI SCSI, Fibre Channel, or SAS adapter is
added to an existing system installation, Windows
automatically detects the new adapter at the next reboot.
When the Device Driver Wizard appears at boot, click the
Next button and continue at
step 8 below.
1. Boot Windows Server 2003 and logon as a user with Administrator
privileges.
2. Click the Start button, then right-click My Computer on the menu.
3. Select Properties.
4. Click the Hardware tab, and then click the Device Manager button.