Avago Technologies LSI SAS 3041E-R - Manual (Page 34)

2-12 Windows Driver Installation
Version 1.3 Copyright © 2001, 2002, 2007 by LSI Logic Corporation. All rights reserved.
•
End-to-End Data Protection (EEDP) for LSIFC949X and LSIFC939X
controllers
•
1.5 Gbyte and 3 Gbyte SAS expanders/devices and SATA devices for
the LSISAS1064 controller using the
LSI_SAS.SYS driver.
•
PCI and PCI-X bus protocols
•
LSI Fusion-MPT common software interface
•
Multiple host adapters
•
Multiple Logical Unit Numbers (LUNs)
•
Scatter-Gather operations
•
SCSI pass-thru functionality
•
Disk array configurations with no LUN 0
•
Disk array configurations with non-contiguous LUNs
•
Auto request sense
•
Maximum block size support: 1 Mbyte (32-bit systems), 2 Mbyte
(64-bit systems)
•
Microsoft WMI HBA API for Fibre Channel devices using the
LSI_FC.SYS driver.
The miniport drivers support the following LSI devices and associated
host adapters:
•
The LSI_SCSI.SYS driver supports the LSI53C1020, LSI53C1020A,
LSI53C1030, and LSI53C1030T controllers.
•
The LSI_FC.SYS driver supports the LSIFC919, LSIFC919X,
LSIFC929, LSIFC929X, LSIFC939X, and LSIFC949X controllers.
•
The LSI_SAS.SYS driver supports the LSISAS1064 and LSISAS1068
controllers.
2.3.3 Preparing to Install the Windows Server 2003 Drivers
Before you install the LSI Windows Server 2003 drivers on a new or
existing system, you must create a driver installation CD. To do this, copy
the files listed in
Table 2.1 from the LSI CD-ROM or the LSI website to
the root directory of a writable CD-ROM and label it Windows Server
2003 Driver Installation.